How to Set Raspberry Pi IP Address

Home | Miscellaneous | Pi | Set Address

Sonora Computer Repair
A subsidiary of Charles Varvayanis

Since 1990
(209) 586-3782
charles@varvayanis.com

How to Set Raspberry Pi IP Address

Step-by-step instructions for setting the Raspberry Pi IP Address.

These procedures apply to Raspberry Pi 5, 4 or 3 with Raspberry Pi OS (64-Bit), (32-Bit) or (Legacy, 32-Bit).

General Notes

1. General: The procedures below are optimized for determining the IP Address of a Raspberry Pi 5, 4 or 3 with Raspberry Pi OS (64-Bit), (32-Bit) or (Legacy, 32-Bit).

2. Internet access during setup: Many of the steps below assume and require the target Raspberry Pi is connected to a network with access to the Internet.

Notice about updates, upgrades and installations failing due to repository or network congestion or outages

Occasionally updates, upgrades and installations fail due to repository or network congestion or outages. Sometimes there is an appropriate message saying as such, sometimes a missing file is reported, and sometimes there is just a failure message without an explanation. When this occurs, simply run the command again. If that does not solve the issues immediately, try again later.

Raspberry Pi OS Documentation

https://www.raspberrypi.com/documentation/computers/os.html

Connect to the target Raspberry Pi

Via Raspberry Pi Connect Remote shell or Raspberry Pi Connect Screen share then open a Terminal window.

https://www.raspberrypi.com/software/connect

- or -

Via a Display, Keyboard and Mouse, then open a Terminal window.

- or -

Via SSH

Determine the target Raspberry Pi IP Address:

Via Raspberry Pi Connect Remote shell or Raspberry Pi Connect Screen share then open a Terminal window.

https://www.raspberrypi.com/software/connect
sudo hostname -I
- or -

Connect directly to the target Raspberry Pi via a Display, Keyboard and Mouse, then open a Terminal window.

sudo hostname -I
- or -

Use an IP Scanner tool such as Advanced IP Scanner on a PC or alike to locate the DHCP IP Address assigned to the Raspberry Pi.

https://www.advanced-ip-scanner.com
- or -

Login to your router and examine the DHCP assignments, sometimes labeled "Connected Devices" or similar.

Use SSH via a tool such as PuTTY to connect to the Raspberry Pi.

https://putty.software/

https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html

https://www.putty.org

Connect using the IP address determined above or URL of the target Raspberry Pi.

Note: The first time a connection is made, a security warning may be displayed | Yes

Change the Raspberry Pi IP address and network settings using the Raspberry Pi Desktop Interface (GUI), NetworkManager User Interface (UI), or Command Line Interface (CLI)

Note: While the steps below are specific to setting the IP Address of the Ethernet Port, they can be used for setting the IP Address of a Wi-Fi connection by substituting the references to "Wired Connection 1" with your Wi-Fi Connection.

Update Raspberry Pi OS and Components

Download latest package lists

sudo apt-get update -y

Download and install updated listed packages

sudo apt-get upgrade -y

Enable NetworkManager on Raspberry Pi OS (Legacy) only. Note: NetworkManager is already enabled by default on Raspberry Pi OS (64-bit) and (32-Bit).

Enable NetworkManager

Note: The Subnetwork Mask is expressed in Slash Notation along with an IP Address in certain areas of this section.

Network Subnetwork Mask and Slash Notation Relationships

Class	Mask	Slash	Nodes
A	255.000.000.000	/8	16777214
B	255.255.000.000	/16	65534
B	255.255.128.000	/17	32766
B	255.255.192.000	/18	16382
B	255.255.224.000	/19	8190
B	255.255.240.000	/20	4094
B	255.255.248.000	/21	2046
B	255.255.252.000	/22	1022
B	255.255.254.000	/23	510
C	255.255.255.000	/24	254
C	255.255.255.128	/25	126
C	255.255.255.192	/26	62
C	255.255.255.224	/27	30
C	255.255.255.240	/28	14
C	255.255.255.248	/29	6
C	255.255.255.252	/30	2
C	255.255.255.254	/31	0
C	255.255.255.255	/32	0

Change the Raspberry Pi IP address and network settings using the Raspberry Pi GUI (Desktop)

Note: "Wired connection 1" is the default Ethernet connection name and is assumed in the following commands.

Click on the two arrows facing up and down on the right side of the Task Bar at the top of the Raspberry Pi desktop

Click on "Advanced Options" | "Edit Connections..."

Doubke Click on "Ethernet" | "Wired connection 1"

Click on the "IPv4 Settings" Tab

Click on these fields to edit them:

"Method" | Manual

"Address"
(Your Rspbrry Pi IP Address)
Example:
192.168.0.25

"Netmask"
(See the section above "The Subnetwork Mask is expressed in Slash Notation...")
Example:
/24

"Gateway"
(Typicaly the network router LAN IP Address)
Example:
192.168.0.1

"DNS servers"
(Use commas to seperate multiple domain name server addresses)
Example:
8.8.8.8,8.8.4.4

Click on the "Save" Button

X out of the "Network Connections" window

- or -

Change the Raspberry Pi IP address and network settings using the NetworkManager User Interface (UI)

Note: "Wired connection 1" is the default Ethernet connection name and is assumed in the following commands.

Open the NetworkManager User Interface (UI)

Restart the connection to begin using the new settings

sudo nmcli con up "Wired connection 1"

- or -

Change the Raspberry Pi IP address and network settings using NetworkManager Command Line Interface (CLI)

Show all network connections

sudo nmcli con show

Note: "Wired connection 1" is the default Ethernet connection name and is assumed in the following commands.

Set IP Address

(Note: The Subnetwork Mask is expressed in Slash Notation along with the IP Address)
sudo nmcli con mod "Wired connection 1" ipv4.addresses <YourRaspberryPiIPAddress>/<YourNetworkSubnetworkMask>
Example:
sudo nmcli con mod "Wired connection 1" ipv4.addresses 192.168.0.25/24

Set the Gateway Address

(Note: Typicaly the Gateway Address is network router LAN IP Address)
sudo nmcli con mod "Wired connection 1" ipv4.gateway <YourNetworkDefaultGatewayIPAddress>
Example:
sudo nmcli con mod "Wired connection 1" ipv4.gateway 192.168.0.1

Set the DNS Servers

(Note: Use spaces to seperate multiple domain name server addresses)
sudo nmcli con mod "Wired connection 1" ipv4.dns" <DNSServer1> <DNSServer2> <DNSServer...>"
Example:
sudo nmcli con mod "Wired connection 1" ipv4.dns "8.8.8.8 8.8.4.4"

Set the Addressing Mode to Manual (Static)

sudo nmcli con mod "Wired connection 1" ipv4.method manual

Restart the connection to begin using the new settings

sudo nmcli con up "Wired connection 1"

Diagnostics and verification (Optional)

Display the IP Address, Gateway, DNS Servers and Addressing Mode (Short version)

sudo nmcli -g ip4.address,ipv4.gateway,ip4.dns,ipv4.method connection show "Wired connection 1"

Display the profile so all parameters can be reviewed (Long version)

sudo nmcli -p con show "Wired connection 1"

Sonora Computer Repair
Sonora, CA 95370
e-mail: charles@varvayanis.com
Phone: (209) 586-3782
Fax: (209) 586-3761
Business Card (PDF 153 KB)

www.sonoracomputer.com